Grains arriving in the mill usually contain foreign matter, such as strings, straw, parts of bags, wood, stones, or metal that must be removed before processing. The contaminants usually become mixed with the grains in the field and during its transfer through the various stages of the grain processing and grain-handling system. In addition, grains always contain some seeds of other plants, even if grown under the best conditions. If farming or environment conditions are poor, the amount of screenings is likely to increase. Although part of the foreign material (dockage), or all of it, is discounted in the trade, the cleaning system in the mill should be designed to allow the miller enough flexibility to properly clean any Grains arriving at the mill.

The CLEANING SECTION is subdivided into-

  1. Intake – Incoming Grains is weighed, sampled and analyzed.
  2. Pre Cleaning – Upon arrival, the Grains are pre-cleaned with a high-capacity system to separate coarse foreign material, ferrous particles, and dust and to prepare the Grains for storage and safe handling.
  3. 1st Cleaning – Major Cleaning ends at dampening or washing
  4. Conditioning or Tempering – To prepare Grains in the same state of mellowness for same grinding conditions
  5. 2nd Cleaning – To remove any impurities left over in previous cleaning system

To make effective cleaning we need proper cleaning machines for getting the best results. Customer can find suitable machine for every need from our vast range of grain processing machines.

reel machine

SPECIFICATIONS*

  • Reel  machine is an ideal machine for pre cleaning  purpose .
  • Available in various sizes (2 sieves, 3 sieve & 4 sieve with sieve cleaning brush)
  • This machine is used to separate out fine and large size impurities
FEATURES 2 SEIVE 3 SEIVE 4 SEIVE
ITEM NO. S940 S965 S986
TECHNICAL SPECIFICATION
                                             MODEL LENGTH WIDTH HEIGHT CAP/TON/HR POWER/KW AIR QTY
2 SEIVE 2300 820MM 1220MM 2-3 2 5M3/MIN
3SEIVE 3440 1070MM 1820MM 4-6 3 10M3/MIN
4 SEIVE 4350 1070MM 1820MM 8-10 5 10M3/MIN

image3

SPECIFICATIONS*

  • Used to remove large and small size impurities from the grain
  • Machine is known for high capacity output and low power consumption
  • It is easy to change sieve frames and requires minimum attention
  • Available in different model
FEATURES SVVS- 1-700×1400 (Double deck) SVVS-2 – 1000×2000 (Double deck) SVVS-3

1000×2000 (Double  deck)

ITEM NO. S939 S836 S761
TECHNICAL SPECIFICATION
MODEL LENGTH WIDTH HEIGHT CAP/TON/HR H.P AIR QTY
SVVS-1- 1500MM 1050MM 1500MM 2-3 1 30-50M3/MIN
SVVS-2 2500MM 1650MM 1700MM 4-6 1 40-60M3/MIN
SVVS- 3 2800MM 1850MM 1700MM 6-8 2 50-70M3/MIN

image4

SPECIFICATIONS*

  • Double functioning  facility available in the single machine (Grading +de-stoning)
  • High capacity with low power consumption
  • Easy to adjust control of feed, Air  Flow & Deck elevation                                           
FEATURES SVDS-1 730×900 SVDS-2 900X1200 SVDS-3 1100X1200
ITEM NO. S938 S763 S764
TECHNICAL SPECIFICATION
MODEL LENGTH WIDTH HEIGHT CAP/TON/HR POWER/KW AIR QTY
SVDS-1 730×200 1790MM 950MM 2310MM 4-6 1 80-100M3/MIN
SVDS-2 1000X200 1790MM 1250MM 2310MM 8-10 2 150-200M3/MIN
SVDS-2 1200X200 1790MM 1450MM 2610MM 10-15 4 250-200M3/MIN

image5

SPECIFICATIONS*

  • This  is an ideal machine used for de –hulling of wheat & other grains
  • Highly sophisticated
  • Mostly used in whole meal Atta plant and Dal plant
  • The processing effect of the machine can be adjusted from outside by means of slide control device.
FEATURES 12’’x30’’ 14’’X33’’ 16’’X33’’
ITEM NO. S765 S988 S766
TECHNICAL SPECIFICATION
MODEL LENGTH WIDTH HEIGHT CAP/TON/HR POWER/KW AIR QTY
SVER-1

12’’x30’’

1570mm 500MM 700MM 1-1-5 7.5 15-20M3/MIN
SVCS-1

14’’X33’’

1730MM 650MM 1100MM 2-2.5 10 25-30M3/MIN
SVER-1

16’’X33’’

2100MM 750MM 1200MM 3-3.5 15-20 35-40M3/MIN

image6

SPECIFICATIONS*

  • This  high end machine is used for the uniform dampening of grain.
  • It ensures extremely uniform water distribution
  • Large volume of water addition (up to 8% ) is possible
  • Unique self emptying system ensures lesser need of sanitation & maintenance.
  • With Electric motor
FEATURES SVID -SS- 1800 SVID -SS-2400
ITEM NO. S772 S773
TECHNICAL SPECIFICATION
MODEL LENGTH WIDTH HEIGHT CAP/TON/HR POWER/KW
SVID -SS-1800 1350MM 420MM 1000MM 4-6 7.5
SVID -SS-2400 2370 MM 420MM 1000MM 6-8 10

image7

SPECIFICATIONS*

  • Plan shifter is used for sieving and grading of  material of powder form, Mainly flour.
  • Our shifter is available in different size.
  • 2 feed ,4 feed,8 feed, and different sieves 10,12,14,16,20 40
  • With imported Bolting Cloth and Suitable Electric Motor
FEATURES SVPS 2X12 SVPS 4X12 SVPS 4X16 SVPS 8X16 SVPS 8X20
ITEM NO. S941 S835 S819 S820 S821
TECHNICAL SPECIFICATION
MODEL LENGTH WIDTH HEIGHT CAP/TON/HR POWER/KW
SVPS 2X12 1800MM 1200MM 2500MM 1-2 2
SVPS 4X12 2000MM 1800MM 3600MM 3-4 3
SVPS 4X14 4-5 3
SVPS 8X16 2400 MM 2200 MM 3600 MM 4-6 5

image8image9

SPECIFICATIONS*

  • This  is an ideal machine used to for de –hulling of wheat & other grains
  • Highly sophisticated
  • This machine is mostly used in whole meal Atta plant and Dal plant
  • The processing effect of the machine can be adjusted from outside by means of slide control device.
FEATURES SVVAC 100 SVVAC 150 SVDAC 100 SVDAC 150
ITEM NO. S849 S977 S781 S782
TECHNICAL SPECIFICATION
 

Type

SVVAC 100 SVVAC 150 SVDAC 100 SVDAC 150
 

Air flue width (mm)

1050 1520 1050 1520
 

Air flue thickness  (mm)

200/300 200/300 200/300 200/300
 

Air Pressure (mm H2O)

50 60 50 60
 

Air Volume (m3/min)

52~90 80~135 52~90 80~135
 

Dimension (mm) LxWxH

1020×200/300×1450 1520×200/300×1450

image10

SPECIFICATIONS*

  • This  is an ideal machine used to for de –hulling of wheat & other grains
  • Highly sophisticated
  • This machine is mostly used in whole meal Atta plant.
  • The processing effect of the machine can be adjusted from outside by means of slide control device.
FEATURES SVEP-1 – 12’’x30’’
ITEM NO. S1030
TECHNICAL SPECIFICATION
MODEL LENGTH WIDTH HEIGHT CAP/TON/HR POWER/HP AIR QTY
S1030 1360 mm 500 MM 1825MM 2-2.5 20+3 10-15M3/MIN
  • Power required for Wheat  :  20 HP
  • Machine supplied with 3 HP motor fitted for blowers , Vee belts  4 Nos. of standard size C-112
  •  1 No. extra pulley 0f 10 X 4 X C section.
  • Pulley on machine is 12 X 4 X C section
  • RPM required  800 approx

image11

SPECIFICATIONS*

Vibro separators are circular gyratory screens used to separate solids from solids and liquid from solid. Vibro Sifter consists of Specially Designed Motor mounted vertically at the center of the base plate of the Screen. The Screen is in between feeding hopper and bowl. The material is fed on to the center of top screen. The undersize material passes rapidly through the screen during its travel to the periphery. The oversized material get continuously discharged through a tangential outlet. This is achieved by specially designed Vibratory Motor along with eccentric Top and Bottom Weights.

FEATURES SVBS-1 900 SVBS-1 1200 SVBS-2 1200 SVBS-1 1500
ITEM NO. S1020 S1021 S1022 S1023
TECHNICAL SPECIFICATION
SCREEN SIZE DESCHARGE HEIGHT OVERALL HEIGHT CAP/TON/HR POWER/HP
MM 1ST 2ND 3RD
SVBS-1 900 925 470 595 840 1150 1Ton /Hr 1
SVBS-1 1200 1210 545 715 885 1280 1.5 Ton /Hr 1.5
SVBS-1 1500 1525 785 785 1010 1375 2 Ton /Hr 2